What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 02:39
One is “what exactly is in a ‘surge protector’ ? ”
This one hit behind the barn.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Jonathan Joss, ‘King of the Hill’ and ‘Parks & Recreation’ actor, dead at 59 after shooting - CNN
2024–10–10[John johnson John Johnson ]
At least they know the answer if they wanted it.
(Dc diagram shown, AC is similar).
Enhanced Box Score: Nationals 2, Cubs 0 – June 4, 2025 - Bleacher Nation
These are simplified answers to the original question, and does not change anything I wrote above.
This is where the MOV conducts again, and dissipated the energy.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
but this device (an Inductor) … impedes the rapid changes in the current.
How do you feel about Donald Trump signing an executive order that says there are only two genders?
the problem then depends on "how fast does the fuse operate?".
This is where this question deviates from being a 'generic' question, and becomes more specific.
So, the voltage could go up to 500 volts, and the fuse will not open up.
a photo is worth a thousand words.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What is lightning?
This Diet Change Could Help You Sleep Better, According To Study - AOL.com
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
The MOV will conduct when the voltage exceeds 50% of line voltage.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
It also is a device that limits the change in current flow.
New study raises big questions about taurine as anti-aging supplement - Live Science
These devices are installed between the “hot” and “neutral” and protective ground.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Upvotes:
For this case there are devices called Metal oxide varistors (MOV).
But… the neutral is now “floating” because of the 1 ohm resistance.
He then describes Rainy Season and Lightning.
What ESPN’s Football Power Index is projecting for Big 12 rivals BYU and Utah in 2025 - Deseret News
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Because the load is inductive, the current lags the voltage.(by a bit).
'Disconnected' tyre should force Spanish GP strategy variety - The Race
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–16 [ OO OLAOYE OYEBODE ]
Israel says it struck Tehran's Evin prison and Fordo access routes - BBC
A circuit breaker is similar, but is resettable.
There are two important concepts here.
It seems Mohan does not understand the difference between a comment and an Answer.
Aldi vs Oreo: Oreo maker sues Aldi over 'copycat' packaging - BBC
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
But it can get overloaded, and no longer works.
He then asserts :
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
but I think this circuit , shows a few more pieces.
The bolt then partially travels down the line to your home.
An AC voltage/ current source, and an ac inductive load.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
First Sentence:
At one ohm, the resistor has a maximum of 1 watt power.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Edit 2024–10.
[image of Common-mode choke]
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is 'the assistant's answer'
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
[old diagram got deleted by accident]
The third is lightning and “how it gets conducted into a home.”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
There are three different concepts here that are getting confused.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
eight
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
In schematic diagrams this is the symbol for a fuse:
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
what exactly is a ‘surge’ protector?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
A fuse is a non-resetable over current circuit protector.
What does a fuse do?
This device then solves the entire problem.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
so, what happens?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Here is a simplified AC power diagram.
He then describes the function of a fuse.
Now when you have a certain ac resistance, then a current flows in a loop.
nine
I post the exact comment here.
The other is “what does a “fuse” do?”
2024–10–14 [Omar Gharbi Omar Gharbi ]
One
Barnstars:
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.